Bottled Water Production Line
Equipment List
| Equipment | Mole | Qty | Remark |
| RO Water Purification System | RO-1000I(1000L/H) | 1 | SS304 pre-treatment filters
DOW FILMTEC RO Membranes Ozone + UV Post Treatment 1000L SS304 water tanks 2sets |
| Separated Bottle Washing, Filling And Capping Production Line | 12-12-1 | 1 | 7meters conveyer
2 moulds for 2 bottle sizes |
| Semi automatic blow molding machine(not including Blowing moulds) | HY-B-I | 1 | 1m3/30kg compressor
High pressure tube Air Filter |
| Manual label-shrinking machine | 1 | Heat Shrinking Oven
Steam Generator 2 meters additional conveyer |
|
| Ink Jet Printer | 1 | Including 4 bottles ink + 40bottles solvent(one year’s use) | |
| Semi-auto Shrink- Wrapping Packing Machine | JMB-80A | 1 | Film cutting & wrapping machine
Heat Shrinking Machine |
| Sub total | 6 | Standard voltage is three phase 380V, 50Hz/ single phase 220V, 50Hz. |
Specification for each Item
Production Process:
Part One:
R.O Water Purification System Model: RO1000J (1000L/H)
Working Process:
Water Source → Booster Pump →Quartz Sand Filter→ Activated Carbon Filter →Precise Filter →High Pressure Pump →RO Membrane→ Pure Water→ Filling Machine
↑Ozone Generator
Main Components of the System
| Basic Configuration | Item | Description |
| Pretreatment part | Feed pump | CNP CHL2-50 |
| Sand filter | Dia 400×1600 (filter 230kg) SS304 | |
| Active Carbon filter | Dia 400×1600 (filter 85kg) SS304 | |
| Micron filter | 10″ X 5 micron filter | |
| RO Part | Pressure pump | CNP CDL2-180 |
| RO membrane | FILMTEC BW30-4040 x 3pcs | |
| Membrane vessel | 4040 stainless steel VESSEL 3 SETS | |
| Indicators | TDS,PH and Conductivity indicator | |
| Piping and controlling valve | Piping and valves | U-PVC piping & Valves |
| Control system & Indicator | Water level control, Pump protecting,Automatic electric valve control | |
| Other fittings of machine | Pressure gage | 1.0MPa,2.5Mpa. 5pcs in total |
| Conductivity of the table | CM230 X 2sets | |
| Main frame | Stainless steel 1set | |
| motorized valve | DN20 | |
| Pipeline flow meter | 10GMP 2sets | |
| Ozone System | OZ-3G, 6’organic glass ejector | |
| Water Tank | 1000L Stainless steel water tank 2sets |
4. Pictures:
Part Two: 1000-2000 bottle/hour Separated Washing, Filling And Capping Production Line (Model: 12/12/1)
Ⅰ Automatic bottle washer（CP-12）
CP series full-automatic rotary bottle washer adopts 1990’s technology of West Germany SEN Corp, and is developed by combining the situation of our country. It adopts continuously spraying and washing way. It has high efficiency and good washing result. The equipment is applicable in different kinds of bottles. It’s perfect equipment in the production line of beverage industry.
Main technical parameter
| Model | CP-12 |
| Production capacity | 2000-3000B/H |
| Power | 0.75kw |
| Overall dimensions (mm) | 1200×1200×1700 |
| Weight | 700kg |
Equipment Picture：
Ⅱ Automatic atmospheric pressure filler (CG-12)
The filler is mainly used for filling non-gas contained drinks such as purified water, mineral water and juice etc. You can use it for high temperature filling by replacing the parts. It is an ideal filling equipment of medium-small scale drink factory.
Main technical parameter
| Model | CG-12 |
| Production capacity | 1000-2000B/H |
| Power | 0.75 kw |
| Overall dimensions (mm) | 1040×1040×1800 |
| Weight | 800kg |
Equipment Picture：
Ⅲ Automatic sealer (FG-1)
The sealer is suitable for sealing various PET bottles. It is perfect in performance, reliable in operation and easy in maintenance. So it is widely used in automatic packing lines for various kinds of wine, drink, food, medicine, reagent, pesticide and so on. It is one of the most ideal screw type automatic sealing equipment.
Main technical parameter
| Model | FG-1 |
| Production capacity | 1000-2000B/H |
| Power | 0.75kw |
| Overall dimensions (mm) | 940×700×2000 |
| Weight | 300kg |
Equipment Picture：
Ⅳ
Conveying system (With platform)
| Name | Type | QTY | Remark |
| Electromagnetic Speed Motor Controller | JDIA40 | 1Pcs | DELIXI |
| Push button | LAY7 20XB131 | 1Pcs | DELIXI |
| AC contactor | CJX2–0910 | DELIXI | |
| Variable speed motor | 0.55KW 380V | 1Pcs | |
| Shell packaging board | Stainless steel 304 | ||
| Sliding bearing | Harbin Bearing | ||
| Platform for bottle in and out | 2set | Stainless steel 304 | |
Part Three: Semi-Automatic Blow Molding Machine (Model: HY-B-I)
Specification:
HY-B-I semi-automatic bottle blow molding machine is suitable for producing PET plastic containers and bottles from 50-2000ml. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc.
●Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
●The air system has been divided into two parts: pneumatic action part and bottle blow part to meet the different requirements for the action and blow .It can provide sufficient and steady high pressure for blowing large irregular shaped bottles.
●The machine is also equipped with muffler and oiling system to lubricate the mechanical part of the machine.
●The machine can be operated in the step-by-step mode and the semi-auto mode.
●The machine is small with low investment, easy and safe to operate.
Main parameter:
| Max. volume of moulded product） | 2000ml |
| Max.product capacity | 800-1200PCS/H |
| Max.Heating power | 14kw |
| Pressure of air supply | 2.5mpa |
| Max.mould dimension | 20*35*38cm |
| Max.shifting mould dimension | 17cm |
| Center distance between two bottles | min9cm max20cm |
| Max.stretched length | 35cm |
| Weight
Voltage |
650kg
Three phase : 380V/50HZ Single-phase: 220V/50HZ |
| Size Mainmachinine | 160*60*161cm |
| Oven | 187*63*145cm |